New Product Announcements | Murata Power Solutions

JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Home

News

New Product Announcements

Contact

Print

DC panel meters display voltage, current and power

Date: Jul 10 2018

Murata introduces the new DCM20 series of multifunction panel meters from Murata Power Solutions. For DC systems, these meters measure DC voltage and current, calculate power up to 96 kW, and display values either manually selected or continuously cycling. The miniature panel-mount product provides an input voltage range of 0.5 to 72VDC, with 10mV of resolution. The meter also supports current mea

Category: New Product Announcements, New Product Announcements
Highly efficient DC/DC converter for telecom applications

Date: Jun 18 2018

Murata has announced the 1 kW DRQ-11.4/88-L48 Series of quarter brick, intermediate bus, DC/DC converter modules that address the growing power requirements of high-reliability networking and telecommunications infrastructure equipment. The fully regulated DRQ-11.4/88-L48xx Series provides 11.4Vout at 88 A, with a Vin Range of 36 to 60Vdc, operating from 48Vdc battery systems or networking equipme

Category: New Product Announcements, New Product Announcements
IRH DC-DC converters are ideal for industrial and rail applications

Date: May 30 2018

Murata launches its latest encapsulated DC-DC converters, designed specifically for use in industrial and railway applications. The 150 Watt IRH series from Murata Power Solutions provides market-leading power conversion efficiency, in an industry-standard half-brick pinout, using the latest component and packaging technologies in a fixed-frequency switching power supply architecture. Murata’

Category: New Product Announcements, New Product Announcements
Murata’s new pSemi approved transformers save time and cost

Date: May 10 2018

Murata Power Solutions has announced the release of its 782100 series of transformers designed specifically for use with the Peregrine (pSemi) PE22100 push-pull DC-DC converter driver ICs. The combination of driver IC and transformer allows for easy implementation of an isolated DC/DC converter rated up to 1W, typically used for powering the secondary side of an isolated data interface such as RS2

Category: New Product Announcements, New Product Announcements
New NMUSB2022PMC combines isolated data communication and power in one module

Date: Apr 26 2018

Murata announces the introduction of the NMUSB2022PMC, a surface mount powered data isolator module that conveniently provides dual port USB data and power isolation from a single upstream port. When used in conjunction with a USB host, a single NMUSB202PMC module counts as two USB hubs for cascaded applications and provides full 5V/500mA power to each downstream port. 250VRMS reinforced isolatio

Category: New Product Announcements, New Product Announcements
Murata’s 1/16th brick DC/DC converters offer industry-leading performance

Date: Mar 27 2018

Murata launches its latest in a series of encapsulated DC-DC converters designed specifically for industrial, industrial mobility and railway applications. The 50 watt IRS-Q48 series from Murata Power Solutions provides market-leading efficiency using the latest technology for fixed frequency switching power supply architectures, in an industry standard 1/16th brick pinout. Murata’s IRS-Q48

Category: New Product Announcements, New Product Announcements
Murata releases new 1W regulated SMT DC-DC converter

Date: Mar 06 2018

Murata has expanded its product range of embedded-core technology DC-DC converters with the NXF1 series, a cost effective, fully regulated, high isolation converter with 3.3 V or 5 V outputs from Murata Power Solutions. Inputs available are nominal 3.3 V and 5 V in an industry-standard surface-mount package with a uniquely low profile. Line regulation is typically better than 0.03 % and load regul

Category: New Product Announcements, New Product Announcements
DC-DC converter offers efficient replacement for 78xx linear regulator

Date: Oct 11 2017

Murata today announces the addition of the OKI-78SR-E series of three terminal non-isolated DC-DC converters designed by Murata Power Solutions for use in harsh environment applications. The series features three modules with a fixed single output voltage of 3.3 V at 1.5 A, 5 V at 1.5 A and 12 V at 1 A. The converters provide a cost effective, highly efficient alternative to a T0-220/78xx series l

Category: New Product Announcements, New Product Announcements
Murata expands popular DC-DC converter range for embedded applications

Date: Sep 13 2017

Murata has added a 12V model to its OKI-78SR series of non-isolated switching regulator DC/DC power converters for embedded applications. The fixed single output converter offers both tight regulation and high efficiency directly at the power usage site, and is a direct plug-in replacement for TO-220 package 78xx series linear regulators. Rated at 12V/1A, when powered from a 24V source, the OKI

Category: New Product Announcements, New Product Announcements
Murata’s DC/DC converters feature high isolation for industrial power installations

Date: Jul 25 2017

Murata has introduced a series of high isolation DC/DC converters developed by Murata Power Solutions. The MGJ6 wide, low-profile series converters feature a 14 mm creepage and clearance distance for use in reinforced-rated isolated-gate drive-power applications in higher efficiency 690 VAC industrial electrical distribution systems. They provide optimised voltages for best system performance and

Category: New Product Announcements, New Product Announcements

RSS Feed

Categories