 |
 |
|
|
|
| Z-Digital IBAT Products |
 |
| A Digital Power Management Architecture for Every Application |
|
|
| Z-1000 POLs |
| Hardware-configurable Z-POLT converters do not require programming, external controllers, or bus interfaces. |
Features and Benefits |
- Output voltages (0.5 to 5.5V) and turn-on delays are configured with an external resistor and a capacitor respectively.
- Up to ten Z-1000 POLs can current share using a single control trace.
- Z-1000 POLs can start up with pre-biased outputs.
- Active bus termination sink and source current capabilities.
- Reporting of output current and temperature via signal pins.
- Thresholds for overvoltage, undervoltage, and Power Good track the output voltage settings.
|
| Pin-Strappable Coordination and Optimization |
- Frequency synchronization and phase interleaving reduces EMI.
- Comprehensive sequencing and cascading management.
- Feedback loop compensation and enable logic.
- Frequency synchronization, fault propagation, and current sharing
are implemented, without external components, by interconnecting the
respective pins on the Z-POLs being coordinated.
|
| Z-1000 Product Selection |
| 7 Amp Horizontal POL |
JZY1207J |
| 15 Amp Vertical Z-POL |
JZY1115J |
| 20 Amp Vertical POL |
JZY1120J |
|
|
