Both the 60A and 70A DC/DC converters have a current density of approximately 50A/in³ and efficiency of 88% at full load. Programmable output voltage range is 0.6 to 3.5VDC, with a typical set point accuracy of 0.5%. Input voltage is 12VDC.

Features

• Small form factor with 1U height.
• Programmable 0.6V to 3.5V output.
• Current density of approximately 50A/in³.
• Efficiency of 88% at full load.
• Input voltage 12VDC.

• The 60A-rated VCN60BADJTU-1C and 70A-rated VCN70BADJTU-1C provide high efficiency, high bandwidth solutions for a wide range of applications.
• The modules have an industry standard height of 1U that can help simplify integration.
• Other key features of the VCN60BADJTU-1C and VCN70BADJTU-1C include a soft start circuit, differential remote sense, power good signal, pre-bias turn on, and output enable.
• Comprehensive safety features that include over-voltage, over-current and over-temperature protection further enhance the appeal of the modules to design engineers.

Full data is available for VCN60 & VCN70 on our website.

Regards,
Mike Schiano
Product Manager
Murata Power Solutions, Inc.

The 782485 - a new series of transformers that simplify implementation of isolated RS-485 and RS-422 interfaces based on Analog Devices chipsets by eliminating the need to select, compare and test alternative solutions.

More details >>

The 78SR Series 2A switching regulators provide high operating efficiency for applications requiring 3.3V or 5V outputs, at 2 Amps or less, from 8 to 32V inputs. At a nominal 12V input, full-load efficiencies are typically 95% for 5V models, and 93% for 3.3V models.

More details >>

The ADS-939 sampling A/D converter is a fully integrated data acquisition system that gives true 16-bit resolution performance at a 10MHz sampling rate over the entire operating temperature range, up to full Military.
More details >>