3D Models of Digital Panel Meters

If you do not find the MPS product series that you need in the list below, click the button to the right to request a new model. New models take 5-10 days to be created. Once finished, an e-mail will be sent informing you that the new model may be downloaded. Please note that requests cannot be completed without a valid e-mail address and telephone number. Please specify the exact model required and the type of file desired (SOLIDWORKS® 2011 software, STEP or IGES files). Standard 3D models are simplified and generic to the family of products and are made available for general use; these generic models may not present an accurate representation of every member of a family of products.

Murata Power Solutions makes no warranty or guarantee as to the suitability of its products or models for any specific application. Murata Power Solutions reserves the right to make changes at any time without further notice. 3D models are created using nominal values for physical dimensions and material properties; tolerances are not factored into the models. Please refer to the published data sheet in conjunction with the following files. All parameters should be validated by the customer’s own technical experts. By downloading a model, the user agrees to absolve Murata Power Solutions from all liability related to the use or application of the model or product.

SolidWorks® is a registered trademark of Dassault Systèmes SolidWorks Corp.